Aluminum Alloy 6061 Technical Data

Jack Lie CNC machining expert

Specialize in CNC Milling, CNC Turning, 3D Printing, Urethane Casting, and Sheet Metal Fabrication Services.


Alloy Description

Generally selected where welding or brazing is required or for its high corrosion resistance in all tempers. Formability is excellent in O temper and good in the T4 temper. Machining is more difficult when compared to the other machining alloys. Corrosion resistance and appearance after anodizing are superior to all other screw machine alloys while strength is the lowest.

   1 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
2 Stress-corrosion cracking ratings are based on service experience and laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test.
A= No known instance of failure in service or in laboratory tests.
B= No known instance of failure in service; limited failures in laboratory tests of short transverse specimens.
C= Service failures with sustained tension stress acting in short transverse direction relative to grain structure; limited failures in laboratory tests of long transverse specimens.
D= Limited service failures with sustained longitudinal or long transverse
3 Ratings A through D for Workability (cold), A through E for Machinability and A through C for Anodize Response, are relative ratings in decreasing order of merit.
4 Ratings A through D for Weldability and Brazeability are relative ratings defined as follows:
A= Generally weldable by all commercial procedures and methods.
B= Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
C= Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
D= No commonly used welding methods have been developed