CNC engraving is a subtractive manufacturing process that uses a rotating cutting tool to precisely remove material from a workpiece, creating a desired shape or design. It is highly accurate and efficient, allowing for repeatable and precise results. CNC engraving … Read more
Grade Colour Temperature (°C) Shore Hardness Standard Black -40 to +100 81°A (±5) Other grades or plastics for your custom machined rubber parts are available upon request.
Grade Colour Temperature (°C) Shore Hardness FDA, EU1935/2004 & EU10/2011 Approved Brown -25 to +220 85°A (±5) FDA & EU1935/2004 Approved White -25 to +210 84°A (±5) Standard Black -20 to +220 80°A (±5) Soft Black -25 to +220 74°A … Read more
Grade Colour Temperature (°C) Shore Hardness FDA & EU1935/2004 Approved White -60 to +210 84°A (±5) FDA & EU1935/2004 Approved Blue -60 to +210 84°A (±5) FDA & EU1935/2004 Approved Red -60 to +210 83°A (±5) FDA & EU1935/2004 Approved … Read more
Grade Colour Temperature (°C) Shore Hardness Standard Black -45 to +135 87°A (±5) WRAS Approved Black -50 to +135 97°A (±5) FDA & EU1935/2004 Approved White -55 to +135 88°A (±5) Soft Black -53 to +135 76°A (±5) Soft, FDA … Read more
Grade Colour Temperature (°C) Shore Hardness Standard Black -35 to +110 85°A (±5) Hard Black -30 to +110 90°A (±5) FDA & EU1935/2004 Approved White -30 to +105 88°A (±5) Soft Black -35 to +110 73°A (±5) Low Temperature Black … Read more
Grade Colour Temperature (°C) Shore Hardness FDA Approved* Red -30 to +115 94°A (±3) Standard Green -30 to +115 94°A (±3) Low Temperature Dark Blue -50 to +115 94°A (±3) Hard Dark Red -30 to +110 58°D (±3) Lubricated Black … Read more
CNC machining is one of the top-notch technologies in the manufacturing sector. In the past, milling was the most preferable manufacturing process when talking about metalworking. However, in the past few decades, CNC machining has taken its place. There are … Read more
Understanding CNC feeds and speeds is essential for anyone aiming to achieve high-quality, high-precision machining results. These two parameters—cutting feed rate and spindle speed—directly influence surface finish, dimensional accuracy, tool life, and even overall cycle time. If you want to … Read more
Threaded fastener connections can be loosened due to shock and vibration. This is because friction, bolt stretching, and compression between the threads of the two pieces are not enough to hold them together. To counteract this, lock nuts have been … Read more